Clusterheadaches.com Message Board


    
      
        Clusterheadaches.com Message Board
        (http://www.clusterheadaches.com/cgi-bin/yabb/YaBB.cgi)
      

        New Message Board Archives >> 2006 General Board Posts >> Hey Johnny: Metal Question...
        
(Message started by: Big Dan on Apr 24^th, 2006, 9:11am)

Title: Hey Johnny: Metal Question...
Post by Big Dan on Apr 24^th, 2006, 9:11am

... is it possible to paint anodized aluminium?

If so, what do I prep it with?

-Big Dan

Title: Re: Hey Johnny: Metal Question...
Post by Kevin_M on Apr 24^th, 2006, 10:19am

on 04/24/06 at 09:11:43, Big Dan wrote:

... is it possible to paint anodized aluminium?

If so, what do I prep it with?

Before going on with close-ups requiring lipstick as porn star Nick Chopper, prepping with a good oiling up at the bath house is recommended.

http://www.halcyon.com/piglet/images/woodman.gif

Title: Re: Hey Johnny: Metal Question...
Post by kimmiedawn81 on Apr 24^th, 2006, 10:22am

on 04/24/06 at 10:19:43, Kevin_M wrote:

Before going on with close-ups requiring lipstick as porn star Nick Chopper, prepping with a good oiling up at the bath house is recommended.

http://www.halcyon.com/piglet/images/woodman.gif

LOL [smiley=laugh.gif]

Title: Re: Hey Johnny: Metal Question...
Post by Cathi04 on Apr 24^th, 2006, 10:31am

HeeHeeHee!!! [smiley=ohjez.gif] [smiley=ohjez.gif] [smiley=spit.gif] [smiley=arg.gif] [smiley=arg.gif] [smiley=arg.gif]

Title: Re: Hey Johnny: Metal Question...
Post by Rock_Lobster on Apr 24^th, 2006, 10:44am

GIS for anodized aluminum...
I would polish that...

http://www.olafschainmail.com/images/Image069.jpg

Title: Re: Hey Johnny: Metal Question...
Post by Kevin_M on Apr 24^th, 2006, 11:55am

on 04/24/06 at 09:11:43, Big Dan wrote:

... is it possible to paint anodized aluminium?

If so, what do I prep it with?

No need to paint if you buy the pre-painted aluminum. Prepping only involves consuming the contents.

http://www.tesscar-aluminum-craft.com/images/mustang.jpg http://www.tesscar-aluminum-craft.com/images/spitfire.jpg

You just may be a redneck if...

Mom made your prom dress from a month's drinking

http://pulltabchain.freewebpage.org/DrivewayChainNoTape_Web.jpg

http://www.aluminouspublishing.com/ktimages/dress.jpg

Title: Re: Hey Johnny: Metal Question...
Post by zwibbs/Scott on Apr 24^th, 2006, 12:02pm

Now you've pissed him off http://i53.photobucket.com/albums/g50/zwibbs11/bm11.jpg

Title: Re: Hey Johnny: Metal Question...
Post by Rock_Lobster on Apr 24^th, 2006, 12:12pm

on 04/24/06 at 12:02:50, zwibbs/Scott wrote:

Now you've pissed him off

bwaahahahahahah!!
pull up that zipper, jonny!

Title: Re: Hey Johnny: Metal Question...
Post by Jonny on Apr 24^th, 2006, 3:27pm

on 04/24/06 at 09:11:43, Big Dan wrote:

... is it possible to paint anodized aluminium?

If so, what do I prep it with?

An anodized surface is one of the best surfaces to paint, the anodizing process actually opens the pores in the aluminum and paint will adhere like a mutha. Theres no need for special paint, just clean the surface real good and paint away ;;D

Title: Re: Hey Johnny: Metal Question...
Post by Big Dan on Apr 24^th, 2006, 3:41pm

Even if it's hard-anodized? I though that actually sealed the surface...

-Big Dan

Title: Re: Hey Johnny: Metal Question...
Post by Jonny on Apr 24^th, 2006, 3:46pm

I called the place that has been doing my anodizing for 15 years and thats what the dude I know there told me.

Give them a call.

Duralectra
508-653-7900

Title: Re: Hey Johnny: Metal Question...
Post by Big Dan on Apr 24^th, 2006, 3:55pm

Kickass...

... thanks, Mule Meat.

-Big Dan