|
||
|
Title: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 4:45pm So!, its time for another round of "WTF is it?" ;;D This unit will do in five minutes what it would take one man an hour to do. The red clip on the right is a ground, the black handle on the left is the lead. In the small plastic cup is phosphoric acid which you dip the lead in, in the tall plastic is water and a rag to wash off the acid when done. http://im1.shutterfly.com/procserv/47b6df23b3127cce96d7efcbc5a900000016108AZM2bNk5bM6 NOW....WTF IS IT?....LMAO ;;D (I taped over the name so you bastards cant google it ;) Edit to add: Ok, I guess this kinda tough so I will add this......Seeing that the metal im working on has to be grounded...that means an electrical charge will flow through the metal, add some phosphoric acid to the mix and what am I doing? ;;D |
||
|
Title: Re: This place is fu*king boring...... Post by LeLimey on Jan 2nd, 2006, 4:55pm on 01/02/06 at 16:45:52, Jonny wrote:
Funniest lookin' woman I've ever seen...... :o |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 4:57pm on 01/02/06 at 16:55:37, LeLimey wrote:
ROTFFLMMFAO!!!!!!! [smiley=laugh.gif] Too too funny...LMMFAO ;;D |
||
|
Title: Re: This place is fu*king boring...... Post by BobG on Jan 2nd, 2006, 5:08pm It's for soldering. Or for spreading lead. |
||
|
Title: Re: This place is fu*king boring...... Post by Redd715 on Jan 2nd, 2006, 5:13pm I haven't a f*cking clue.... Did I get it right? [smiley=laugh.gif] |
||
|
Title: Re: This place is fu*king boring...... Post by LeLimey on Jan 2nd, 2006, 5:14pm Getting rust off? |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 5:16pm Nope Good guess Red ;;D Nope |
||
|
Title: Re: This place is fu*king boring...... Post by Redd715 on Jan 2nd, 2006, 5:17pm Quote:
etching designs into the metal? |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 5:21pm on 01/02/06 at 17:17:45, Redd715 wrote:
Ummmm, no...nope, nada |
||
|
Title: Re: This place is fu*king boring...... Post by Melissa on Jan 2nd, 2006, 5:31pm on 01/02/06 at 16:45:52, Jonny wrote:
A new form of electrolysis for your mule??? |
||
|
Title: Re: This place is fu*king boring...... Post by Chillrmn1 on Jan 2nd, 2006, 5:31pm electroplating?? |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 5:36pm on 01/02/06 at 17:31:46, Chillrmn1 wrote:
No, but it does work along the lines of electroplating, ions and shit.....LOL ;;D |
||
|
Title: Re: This place is fu*king boring...... Post by MJ on Jan 2nd, 2006, 5:49pm electrostatic painting. |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 6:04pm on 01/02/06 at 17:49:39, MJ wrote:
On mirrior finish stainless?......Nobody paints shit on my finishes.....LOL ;;D Nope Edit to add example: This is brass, would you paint it?....LMAO ;) http://im1.shutterfly.com/procserv/47b3d734b3127cce9fbec63d0bc400000016108AZM2bNk5bM6 http://im1.shutterfly.com/procserv/47b3d734b3127cce9fbec63a8af300000016108AZM2bNk5bM6 |
||
|
Title: Re: This place is fu*king boring...... Post by Charlie on Jan 2nd, 2006, 6:06pm It's an acid etcher that you use a stencil to etch the design or wording on the metal and the acid is neutralized so it won't continue the process. I use it in my smiley factory: http://www.netsync.net/users/charlies/gifs/factory.gif http://www.netsync.net/users/charlies/gifs/head.jpg See? I ain't so dumb when I get some help... I hope. Charlie http://www.netsync.net/users/charlies/gifs/brain eat.gif My evil self thought it's a weird small arc welder. |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 6:11pm Sorry Charlie :-* |
||
|
Title: Re: This place is fu*king boring...... Post by BobG on Jan 2nd, 2006, 6:21pm You're not painting it so you must be clear coating it. |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 6:25pm on 01/02/06 at 18:21:20, BobG wrote:
You dont need to run an electrical charge to clear coat, Bro. I will post pictures of what it does tomorrow, for the $800 this thing cost me it paid for its self on the very first job just in time saved. |
||
|
Title: Re: This place is fu*king boring...... Post by Kevin_M on Jan 2nd, 2006, 7:04pm I'm not going to venture another stupid guess again like the previous eight or so I have before on WTF, but it looks interesting. Quote:
I'll wait for the explanation. Sounds cool. |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 7:08pm on 01/02/06 at 19:04:36, Kevin_M wrote:
No guess is stupid, Bro....not guessing might be ;;D |
||
|
Title: Re: This place is fu*king boring...... Post by Kevin_M on Jan 2nd, 2006, 7:20pm on 01/02/06 at 19:08:25, Jonny wrote:
You SOB, you're gonna make guess aren't you? ;;D electrical charge and acid, applied to metal..................... Ok, how about the '72 WHO concert. |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 7:27pm on 01/02/06 at 19:20:40, Kevin_M wrote:
Depends if you were taking the brown acid or not ;) |
||
|
Title: Re: This place is fu*king boring...... Post by Annette_Emond on Jan 2nd, 2006, 7:34pm I was going to guess electroplating, but now I'm gonna say "galvanizing". |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 7:50pm on 01/02/06 at 19:34:19, Annette_Emond wrote:
The only metal that can be galvanized is pure steel....good guess! |
||
|
Title: Re: This place is fu*king boring...... Post by Kris_in_SJ on Jan 2nd, 2006, 8:01pm It's a permanent hair removal system - will totally take over electrolysis and waxing in spas across the world! Right? Kris |
||
|
Title: Re: This place is fu*king boring...... Post by E-Double on Jan 2nd, 2006, 8:02pm Is it a Hull cell or a Rectifier? |
||
|
Title: Re: This place is fu*king boring...... Post by Tim_Z on Jan 2nd, 2006, 8:12pm Is it an electropolishing machine. ???????????? |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 8:14pm on 01/02/06 at 20:02:42, E-Double wrote:
WTF does that mean? Hey!!, your making me guess now......LMAO ;;D |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 8:15pm on 01/02/06 at 20:12:18, Tim_Z wrote:
Hmmmmmm |
||
|
Title: Re: This place is fu*king boring...... Post by Simon on Jan 2nd, 2006, 8:16pm Makes cheap rusty metal look like highly polished brass? Baa |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 2nd, 2006, 8:17pm on 01/02/06 at 20:16:35, Simon wrote:
Sorry Bro...thats my job....LOL ;;D |
||
|
Title: Re: This place is fu*king boring...... Post by BarbaraD on Jan 2nd, 2006, 8:19pm it's an air gage to blow up Don's dolls..... do I get the prize????? Do I? do I???? |
||
|
Title: Re: This place is fu*king boring...... Post by AussieBrian on Jan 2nd, 2006, 8:32pm Too easy! It's a gill-strap for a flying scrub mullet. One foot's the same as the other is flat and the higher it flies the more. Transduces good coffee, too. |
||
|
Title: Re: This place is fu*king boring...... Post by Grandma_Sweet_Boy on Jan 2nd, 2006, 9:06pm on 01/02/06 at 20:32:36, AussieBrian wrote:
Say, what!!!!! ;;D |
||
|
Title: Re: This place is fu*king boring...... Post by PL259 on Jan 2nd, 2006, 10:01pm Welding A form of TIG or MIG, I don't do fancy metals so ain't got a clue. Purty shiney stuff though :) |
||
|
Title: Re: This place is fu*king boring...... Post by minnie on Jan 2nd, 2006, 10:04pm Jonny are you doing the reverse of electroplating? by the sounds of it your gonna be doing some electropolishing. I know second guess on this but I think I'm right.(if I am thare goes my year I'm only right once a year ask Billy LOL) Minnie |
||
|
Title: Re: This place is fu*king boring...... Post by Guiseppi on Jan 2nd, 2006, 10:48pm Because of my higher level of education I can confidently say that is the only composition that with concurrent/bi polar opposing charges in an ion free atmosphere, will hermetically seal a melinium crystal to tolerances allowing the refraction of the postive radiation to saturate the remaining fee radicals quenching off any further leakage of radiation.........I'm convinced. (the plastic cup threw me) Guiseppi |
||
|
Title: Re: This place is fu*king boring...... Post by chewy on Jan 2nd, 2006, 11:42pm Quote:
That was my answer to. |
||
|
Title: Re: This place is fu*king boring...... Post by Mastifflvr28 on Jan 3rd, 2006, 1:54am Powder coating? Mast |
||
|
Title: Re: This place is fu*king boring...... Post by Dave_Emond on Jan 3rd, 2006, 1:57am Seeing what appears to be some sort of bath below the table, I'm going to guess this is some type of Periodic Pulse Reverse machine, that you are using for electroplating an application of ... hmmm ... Copper? Could be another material, but this machine probably gives you better adherence to the substrate you're working on? I'm really going to go out further on this limb and say you may be customizing a fuel tank for a motorcycle? Am I way off? Or getting close? Dave |
||
|
Title: Re: This place is fu*king boring...... Post by Dave_Emond on Jan 3rd, 2006, 2:06am Now I'm thinking more towards Nickle instead of Copper? Dave |
||
|
Title: Re: This place is fu*king boring...... Post by Jasmyn on Jan 3rd, 2006, 2:09am I guess something to do with induction brazing? Not brassièring ;;D |
||
|
Title: Re: This place is fu*king boring...... Post by burnt-toast on Jan 3rd, 2006, 4:53am Removing heat tint or weld discoloration from stainless steel or maybe brass to avoid oxydation? Tom |
||
|
Title: Re: This place is fu*king boring...... Post by alchemy on Jan 3rd, 2006, 7:18am cutting |
||
|
Title: Re: This place is fu*king boring...... Post by Ghost on Jan 3rd, 2006, 9:39am Its for electric etching? ;;D |
||
|
Title: Re: This place is fu*king boring...... Post by Margi on Jan 3rd, 2006, 9:58am Chroming? |
||
|
Title: Re: This place is fu*king boring...... Post by jimmers on Jan 3rd, 2006, 10:07am Is it for spreading out (Making bigger) or filling in deeper scratches, dings and dents so to make them less visible after the final polish has been done? My other guess would be that you caught someone breaking into your shop and the electric probe would be attached to his pecker, and then you would acid-etch your logo into the bastards forehead for all the world to see. ;;D Seeya, Jimmers |
||
|
Title: Re: This place is fu*king boring...... Post by Melissa on Jan 3rd, 2006, 10:13am You all are wrong!!!! It is used for fishing in Boston. ;;D |
||
|
Title: Re: This place is fu*king boring...... Post by Racer1_NC on Jan 3rd, 2006, 11:02am on 01/03/06 at 10:13:23, Melissa wrote:
Nah....they use tea or explosives for that....... ;;D Bill |
||
|
Title: Re: This place is fu*king boring...... Post by Rock_Lobster on Jan 3rd, 2006, 11:37am on 01/02/06 at 20:12:18, Tim_Z wrote:
I second that. Between the cahtode and the acid, you are eating something away. And since your acid cup is small, I would guess that you are polishing small parts, such as bolts or fittings. You can probably electropolish a dozen or two nuts & bolts in just a few minutes. My other thought would have been some type of electro-brazing, but the acid cup is too small for that. Ash: Don't touch that please. Your primitive intellect wouldn't understand alloys and compositions and... things with molecular structures and the- What are you doing here anyway? |
||
|
Title: Re: This place is fu*king boring...... Post by echo on Jan 3rd, 2006, 11:56am It's a Sprigulator. Used for neutering circus midgets. |
||
|
Title: Re: This place is fu*king boring...... Post by ExplodingEyeBall on Jan 3rd, 2006, 12:04pm Metal-surface-treatment Phosphoric acid removes the oxide scale on sheet steel by acid treatment. Phosphoric acid, a good pickling agent, leaves the steel coated with a thin film of iron phosphates. Phosphoric acid-nitricacid solutions are used for chemical polishing of aluminum prior to anodizing. The mixture selectively attacks the metal surface protrusions, resulting in an overall leveling effect. Some copper and brass are also chemically polished with phosphoric acid. Aluminum, steel(including stainless), and other metals are electropolished in relatively high concentration(50~80%) phosphoric acid solutions containing sulfuric and chromic acids as well as other additives. Either that or it's a flux capacitor..... ;;D |
||
|
Title: Re: This place is fu*king boring...... Post by alchemy on Jan 3rd, 2006, 12:27pm smoothing welds |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 3rd, 2006, 3:17pm It removes welding burns from stainless steel without harming the finish. See here http://www.diversifiedproducts.us/Before%20and%20After.htm |
||
|
Title: Re: This place is fu*king boring...... Post by Tim_Z on Jan 3rd, 2006, 6:08pm Jonny, that's pretty cool, I learned something new today. The Magic Wand.... LOL |
||
|
Title: Re: This place is fu*king boring...... Post by Kevin_M on Jan 3rd, 2006, 6:45pm Looks like a great labor and time saver, as well as doing a better job too. It's a keeper. |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 3rd, 2006, 6:57pm on 01/03/06 at 18:45:33, Kevin_M wrote:
More than you know, Dude...the only other way to get most burns out is with bleaching paste and a wire brush. |
||
|
Title: Re: This place is fu*king boring...... Post by Redd715 on Jan 3rd, 2006, 8:07pm I'd have never guessed..... But then you already knew that didn't you Bro? ;;D |
||
|
Title: Re: This place is fu*king boring...... Post by Jonny on Jan 3rd, 2006, 8:15pm Its not really a girl thing, Babe, but it beats refreshing your browser to see nothing ....hence the boring in my title :-* |
||
|
Title: Re: This place is fu*king boring...... Post by Redd715 on Jan 3rd, 2006, 8:34pm on 01/03/06 at 20:15:11, Jonny wrote:
You calling me a girly girl? Huh? HUH? [smiley=laugh.gif] No cheese for you.... :-* |
||
|
Title: Re: This place is fu*king boring...... Post by Charlie on Jan 3rd, 2006, 11:36pm Not a tattooer then? You could knock me over with a feather. Charlie http://www.netsync.net/users/charlies/gifs/die laughing.gif |
||
|
Title: Re: This place is fu*king boring...... Post by gore2424 on Jan 4th, 2006, 12:34am I know what it is .......................................... It's used to removes welding burns from stainless steel without harming the finish. was I right hehehehehe Ü Terry |
||
|
Title: Re: This place is fu*king boring...... Post by rickyshot on Jan 4th, 2006, 11:16am on 01/02/06 at 18:04:26, Jonny wrote:
Looks like my old bed. Jonny Stop going into my garbage. ;;D |
||
|
Title: Re: This place is fu*king boring...... Post by dennisoc on Apr 21st, 2006, 1:59am I'm glad jonny is in charge |
||
|
Clusterheadaches.com Message Board » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |